Concrete Lintel Calculator

This concrete lintel calculator sizes cast-in-place lintels over doors, windows and openings: total length (clear span plus both bearings), width and depth, times the number of lintels. Remember: the concrete volume is easy — the reinforcement design is what makes a lintel work.

in
in
in
5%
$ لكل yd³

كيفية استخدام هذه الحاسبة

  1. أدخل أبعادك — أقدام للأطوال، بوصات للسماكة.
  2. اضبط الخيارات — نسبة الهدر وحجم الكيس وسعر الخرسانة المحلي.
  3. اقرأ نتائجك — يتم تحديث الحجم والأكياس والوزن والتكلفة مباشرة أثناء الكتابة.

الصيغة

Lintel volume = (span + 2 × bearing) × width × depth × count

مثال محلول: A lintel over a 48 in opening with 6 in bearings each end, 8 × 8 in section: 60 × 8 × 8 in = 2.2 ft³ — about 4 × 80 lb bags each.

ملاحظة هندسية: هذه الأداة تقديم تقديري إرشادي مبني على طرق منشورة وافتراضات محددة. وهي ليست بديلاً عن التصميم الهندسي — بالنسبة للأعمال الإنشائية، تحقق من النتائج مع مهندس إنشائي مرخّص ووفقاً لكود البناء المحلي لديك.

Lintel length is span plus bearing: standard practice is at least 6 inches (150 mm) of bearing each end, more for heavier loads — so a 4 ft opening needs a 5 ft lintel.

Cast-in-place lintels are usually matched to the wall width (8 inches for standard block) with depth of 8 inches for door/window spans; longer spans need engineered depth and reinforcement — typically 2 bars top and bottom with stirrups on wider openings.

Small volumes make lintels a bagged-concrete job, but use a structural mix: M20/3,000 psi minimum, fully rodded into the form around the rebar cage.

الأسئلة الشائعة

أسئلة شائعة حول concrete lintel calculator.

How long should a lintel be?

Clear opening plus at least 150 mm (6 in) bearing each end. A 900 mm window needs a 1,200 mm lintel.

How much concrete per lintel?

Length × width × depth. A 5 ft × 8 in × 8 in lintel is about 2.2 ft³ — roughly 4 × 80 lb bags.

What reinforcement does a lintel need?

Residential door/window lintels typically carry 2 × #4 bars bottom (tension) with #3 stirrups; anything over ~6 ft span or carrying point loads should be engineered.

Precast or cast-in-place?

Precast is faster and quality-controlled; cast-in-place suits odd sizes and continuous bond-beam construction. Volume math here covers the cast-in-place case.

حاسبات ذات صلة

المزيد من الأدوات من عائلة حاسبات الخرسانة.