Concrete Lintel Calculator

This concrete lintel calculator sizes cast-in-place lintels over doors, windows and openings: total length (clear span plus both bearings), width and depth, times the number of lintels. Remember: the concrete volume is easy — the reinforcement design is what makes a lintel work.

in
in
in
5%
$ प्रति yd³

इस कैलकुलेटर का उपयोग कैसे करें

  1. अपने आयाम दर्ज करें — लंबाई के लिए फीट, मोटाई के लिए इंच.
  2. विकल्प समायोजित करें — अपव्यय प्रतिशत, बैग का आकार और आपके स्थानीय कंक्रीट की कीमत।
  3. अपने परिणाम पढ़ें — टाइप करते ही आयतन, बैग, वजन और लागत लाइव अपडेट होते हैं।

सूत्र

Lintel volume = (span + 2 × bearing) × width × depth × count

हल किया गया उदाहरण: A lintel over a 48 in opening with 6 in bearings each end, 8 × 8 in section: 60 × 8 × 8 in = 2.2 ft³ — about 4 × 80 lb bags each.

इंजीनियरिंग नोट: यह उपकरण प्रकाशित विधियों और बताई गई मान्यताओं पर आधारित एक जानकारीपूर्ण अनुमान है। यह इंजीनियरिंग डिज़ाइन का विकल्प नहीं है — संरचनात्मक कार्य के लिए, परिणामों की पुष्टि किसी लाइसेंस प्राप्त संरचनात्मक इंजीनियर और अपने स्थानीय भवन कोड से करें।

Lintel length is span plus bearing: standard practice is at least 6 inches (150 mm) of bearing each end, more for heavier loads — so a 4 ft opening needs a 5 ft lintel.

Cast-in-place lintels are usually matched to the wall width (8 inches for standard block) with depth of 8 inches for door/window spans; longer spans need engineered depth and reinforcement — typically 2 bars top and bottom with stirrups on wider openings.

Small volumes make lintels a bagged-concrete job, but use a structural mix: M20/3,000 psi minimum, fully rodded into the form around the rebar cage.

अक्सर पूछे जाने वाले प्रश्न

concrete lintel calculator के बारे में सामान्य प्रश्न।

How long should a lintel be?

Clear opening plus at least 150 mm (6 in) bearing each end. A 900 mm window needs a 1,200 mm lintel.

How much concrete per lintel?

Length × width × depth. A 5 ft × 8 in × 8 in lintel is about 2.2 ft³ — roughly 4 × 80 lb bags.

What reinforcement does a lintel need?

Residential door/window lintels typically carry 2 × #4 bars bottom (tension) with #3 stirrups; anything over ~6 ft span or carrying point loads should be engineered.

Precast or cast-in-place?

Precast is faster and quality-controlled; cast-in-place suits odd sizes and continuous bond-beam construction. Volume math here covers the cast-in-place case.

संबंधित कैलकुलेटर

कंक्रीट कैलकुलेटर परिवार के और उपकरण।